Ohio Mitigation License # RC202
We are a Licensed and Fully Insured Radon Mitigation Company Serving Minerva
If your home was tested for radon recently and the results came back high, you are in the right place.
We are a local Radon Mitigation company serving Minerva, OH providing individualized installation of radon abatement systems.
We fully guarantee the work that we do and are licensed through the Ohio Department of Health.
If you are concerned about your health and the health of your family, please call us for a Free Mitigation quote at 330-844-0703 or click the link below to schedule.
Radon Mitigation is the systematic process of reducing Radon Gas concentration levels in the breathing zones of occupied residential homes, schools, apartments, businesses, and other commercial buildings in Minerva.
If you need additional information, here is the complete guide to Radon Mitigation.
Understanding the Radon Eliminator Process and how we perform Installation the Right Way
It is easy to mitigate your Radon Gas problem.
However, it requires strategy and proper planning to get right the first time!
During the initial testing phase, we look at several key points of Radon gas intrusion and develop a precise plan of action based upon your Minerva home's needs.
This helps us define the skeleton of how we can custom design an abatement system with the best chance of success in the long run.
To begin the Radon Remediation process, we will need to find a quality suction
point that will allow ease of access for our team, is aesthetically pleasing, and provides the best possible outcome.
This is why you need a company with advanced knowledge of where to put a system and run the exhaust piping properly. Our team has had to redo many jobs from other "professional" installers because they either choose the wrong area to put the suction point at or ran the piping improperly.
When we find the proper suction point, our team will drill a 5" hole into the basement slab for the Mitigation system.
Once the hole drilling is over, our EPA Licensed Radon Mitigation Contractor will determine the necessary depth of the "communication pit" based on substrate material analysis and soil sampling.
This step is vital because the correct dimensions of the contact hole will allow the ventilation fan to draw air from beneath the slab and expel Radon from the house.
If the pit does not have the right dimensions, it will not have the proper pull to direct Radon out of the home.
Once the communication cavity has been dug, the mitigation specialist will find a discharge point to exhaust the Radon safely out of your Minerva home.
It is critical to making sure the radon has been eliminated. It does not have the opportunity to re-enter your Minerva home due to a poorly routed Radon Mitigation System.
Now we can begin the pipe fitting process.
We start this process by sealing the direct access tube base into the ground.
This will be done using a backer rod to fill in the gap and finished with an industrial-grade caulk.
After the base piping is put into place, the Radon Eliminator specialist will choose the best pipe pathway for the remainder of the Mitigation System.
Next, we will connect the PVC pipes with a chemical welding agent to stop any leaks in the piping system and join the ventilation exhaust fan along the tube path outside the home.
It is essential to make sure that the exhaust fan is installed correctly, so it has enough suction to draw the active Radon Gas from beneath your Minerva basement and successfully pull it out of the house.
The majority of the radon mitigation systems can be installed in just a couple of hours, depending on the home's layout.
It also depends if you want an internal or external system installed.
Our staff is experienced with the installation process and knows how to get the job done efficiently.
If you need more details about how long it will take, please read this article.
After the piping system has been put into place and all the other possible intrusion points are sealed, the specialist will ensure the ventilation system is working properly by putting in a system monitor gauge.
The next step for our team is to test the pulling power of the mitigation system by drilling a small hole in an entirely separate section in your basement.
We will use a smoke pencil to make sure that the smoke is drawn beneath the basement floor. This will give us an accurate measurement of the effectiveness of the suction pulling Radon Gas out of your Minerva home.
We take the final step and leave another radon test in your home to ensure the system is working properly. This is called a post-test.
After 72 hours have elapsed, we will come back to check the results and share them with you.
If you need more detailed information on how we check to make sure the system is functioning well, please look at this blog post.
Once your Radon Mitigation system is installed, it will run without the need for any further maintenance or upkeep!
You can breathe easier knowing your home has been freed from the dangers of radon.
Let our Radon Removal Team Safely eliminate Radon Gas from your Minerva home today.
Radon Eliminator is Minerva, Ohio's Premier Radon Mitigation and Radon Testing Company.
Schedule Your Professional Radon Mitigation Estimate in Minerva, Oh now!
Good people to work with. Professional, knowledgeable, neat and clean work, fair pricing. Would recommend highly to others.
