Ohio Mitigation License # RC202
Licensed Radon Mitigation Company Serving Maple Heights, Ohio
If your home was tested for radon recently and the results came back elevated, you are in the right place.
We are a local Radon Mitigation company serving Maple Heights, OH providing customized installation of radon removal systems.
We fully guarantee the work that we do and are licensed through the Ohio Department of Health.
If you are concerned about your health and the health of your family, please call us for a Free Mitigation estimate at 330-844-0703 or click the button below to schedule.
Radon Remediation reduces Radon Gas concentration levels in the breathing zones of homes, schools, apartments, businesses, and other commercial buildings.
It creates a vacuum that draws the radioactive radon gas from beneath the sub-slab of the home and deposits it safely outside of your home before it ever has a chance to enter.
If you need more precise information, here is the ultimate guide to Radon Mitigation.
Understanding the Radon Eliminator Process and how we perform Installation the Right Way
It is simple to mitigate your Radon Gas problem.
However, it requires strategy and proper planning to get it right the first time!
During the initial testing phase, we look at several factors to determine Radon gas intrusion and develop a precise plan of action based upon your Maple Heights home's needs.
This helps us define the skeleton of how we can customize an abatement system with the best chance of success for you in the long run.
To begin the Radon Removal process, we first need to find the right suction
point that will allow ease of access for our team. The site must prove aesthetically pleasing and provides the best possible outcome to permanently reduce your radon levels.
This is why you need a company with advanced knowledge of where to properly install a complete system and properly run the exhaust piping. Our team has had to redo a number of jobs from other "professional" installers because they either choose the wrong area to put the suction point at or ran the piping improperly.
When we find the proper suction point, our team will drill a 5" hole into the basement slab for the Mitigation system.
Once the hole drilling is over, our EPA Licensed Radon Mitigation Contractor will determine the necessary depth of the "communication pit" based on substrate material analysis and soil sampling.
This step is vital because the correct dimensions of the contact hole will allow the ventilation fan to draw air from beneath the slab and expel Radon from the house.
If the pit does not have the right dimensions, it will not have the proper pull to direct Radon out of the home.
Once the communication point has been dug out, our mitigation specialist will find a discharge point to exhaust the Radon safely out of your home.
It is critical to ensure the radon has been eliminated and does not have the opportunity to re-enter your Maple Heights home due to a poorly routed Radon Mitigation System.
Now we can begin the pipe fitting process.
We start this process by sealing the direct access tube base into the ground.
This will be done using a backer rod to fill in the gap and finished with an industrial-grade caulk that does not outgas.
After the base piping is put into place, the Radon Eliminator specialist will choose the best pipe pathway for the remainder of the Mitigation System.
Next, we will connect the PVC pipes with a chemical welding agent to stop any leaks in the piping system and join the ventilation exhaust fan along the tube path outside of the home.
It is essential to make sure that the exhaust fan is installed correctly, so it has enough suction to draw the active Radon Gas from beneath your Maple Heights basement and to successfully pull it out of the house.
The majority of the radon mitigation systems can be installed in just a couple of hours, depending on the layout of the home.
It also depends if you want an internal or external system installed.
Our staff is experienced with the installation process and knows how to get the job done efficiently.
If you need more details about how long it will take to put in a system, please read this article.
After the piping system has been put into place and all the other possible intrusion points are sealed, the specialist will make sure the ventilation system is working properly by putting in a system monitor gauge.
The next step for our team is to test the pulling power of the mitigation system by drilling a small hole in an entirely separate section in your basement.
We will use a smoke pencil to make sure that the smoke is being drawn beneath the basement floor. This will give us an accurate measurement of the effectiveness of the suction pulling Radon Gas out of your Maple Heights home.
We take the final step and leave another radon test in your home to make sure the system is working properly. This is called a post-test.
After 72 hours have elapsed, we will come back to check the results and share them with you.
If you need more detailed information on how we check to make sure the system is functioning well, please look at this blog post.
Once your Radon Mitigation system is installed, it will run without the need for any further maintenance or upkeep!
You can breathe easier knowing your home has been freed from the dangers of radon.
Let our Radon Removal Team Safely eliminate Radon Gas from your Maple Heights home today.
Schedule Your Free Radon Mitigation Quote in Maple Heights, OH today!
Very courteous and friendly to work with. The quality of the work was impeccable.
