Radon Mitigation in Dover, Ohio 

Licensed Local Radon Mitigation Company. Guaranteed Work and Quality Assured!

Schedule Your Free Mitigation Estimate

Dover, Ohio Radon Mitigation Company

Was your home tested for radon recently and the results came back elevated?

Our team can help.

We are a local Radon Mitigation company serving Dover, OH providing individualized installation of radon abatement systems.

We fully guarantee the work that we do and are licensed through the Ohio Department of Health.

If you are concerned about your health and the health of your family, please call us for a Free Mitigation quote at 330-844-0703 or click the link below to schedule.

Schedule Your Free Mitigation Estimate

What Is Radon Removal and How Does it Work?

Radon Mitigation is the systematic process used to reduce or remove Radon Gas concentration levels in the breathing zones of occupied residential homes, schools, businesses and other commercial buildings in Dover.

If you need more information, here is the complete guide to Radon Mitigation.

How does our team Install a Mitigation System?

Understanding the Radon Eliminator Process and how we perform Installation the Right Way

It is easy to mitigate your Radon Gas problem.

However, it requires strategy and proper planning to get it done right the first time! 

During the initial testing phase, we look at several key points of Radon gas intrusion and develop a precise plan of action based upon your homes needs.

This helps us define the skeleton of how we can custom design an abatement system with the best chance of success for the long run. 

To begin the Radon Removal process we will need to find a quality suction
point that will allow ease of access for our team, is aesthetically pleasing and provides the best possible outcome.

This is why you need a company that has advanced knowledge of where to put a system and how to properly run the exhaust piping, our team has had to redo a number of jobs from other installers because they either choose the wrong area to pull the radon gas from initially or improperly ran piping.

When we find the proper suction point, our team will drill a 5" hole into the basement slab for the Mitigation system.

Once the hole drilling is over, our EPA Licensed Radon Mitigation Contractor will determine the necessary depth of the "communication pit" based on substrate material analysis and soil sampling.

This step is vital because the correct dimensions of the contact hole will allow the ventilation fan to draw air from beneath the slab and expel Radon from the home.

If the pit does not have the right dimensions, it will not have the proper pull to direct Radon out of the home. 

Once the communication cavity has been dug, the mitigation specialist will find a discharge point to exhaust the Radon safely out of your home.

It is critical to making sure the radon has been eliminated and does not have the opportunity to re-enter your home due to a poorly routed Radon Mitigation System.

How does the PVC Piping get run?

Now we can begin the pipe fitting process.

We start this process by sealing the direct access tube base into the ground.

This will be done using a backer rod to fill in the gap and finished with an industrial class caulk that does not outgas.

After the base piping is put into place, the Radon Eliminator specialist will choose the best pipe pathway for the remainder of the Mitigation System. 

Next, we will connect the PVC pipes with a chemical binding agent to stop any likely leaks in the piping system and join the ventilation exhaust fan along the tube path.

It is essential to make sure that the exhaust fan is installed correctly, so it has enough sucking to draw the active Radon Gas from beneath your basement home. 

How long does it take to install a mitigation system?

The majority of the radon removal systems can be installed in just a few hours, depending on the complexity of the home.

It also depends if you want an internal or external system installed.

Our staff is experienced with the installation process and knows how to get the job done efficiently.

If you need more details about how long it will take please read this article.

How Will You Know If The Radon Mitigation System Was Installed Correctly? 

After the piping system has been put into place and all the other possible intrusion points are sealed; the specialist will make sure the ventilation system is working properly by putting in a system monitor gauge.

The next step for our team is to test the pulling power of the system by drilling a small hole in an entirely separate section of your basement.

We will use a smoke pencil to make sure that the smoke is being drawn beneath the basement floor, this will give us an accurate measurement of the effectiveness of the suction pulling Radon Gas out of your home.

The final step we take is to leave another radon test in your home to make sure the system is working properly.

After 72 hours have elapsed we will come back to check the results and share them with you.

If you need more detailed information on how we check to make sure the system is functioning well, please look at this blog post.

How Our Dover Radon Removal Team Can Help You Today!

Once your Radon Mitigation system is installed, it will run without the need for any further maintenance or upkeep!

You can breathe easier knowing your home has been freed from the dangers of radon.

Let our Radon Removal Team Safely eliminate Radon Gas from your Dover home today.

Schedule Your Free Mitigation Estimate

Radon Mitigation in Dover, OH

Schedule Your Professional Radon Mitigation Estimate now!

Schedule Your Free Mitigation Estimate


Dover, Ohio

Radon Mitigation Services 


Review
5
Jeff W.

Good people to work with. Professional, knowledgeable, neat and clean work, fair pricing. Would recommend highly to others.