Radon Mitigation is the systematic process used to reduce or remove Radon Gas concentration levels in the breathing zones of occupied residential homes, schools, businesses, and other commercial buildings in Wadsworth.
Understanding the Radon Eliminator Process and how we perform Installation the Right Way
It is easy to mitigate your Radon Gas problem. However, it requires planning and strategy to get it done right the first time.
During the initial testing phase, we looked at several key points of Radon gas intrusion and developed a precise plan of action based upon your Wadsworth home's needs.
This helps us define a blueprint for designing a system with the best chance of success.
To begin the Radon Removal process, our Radon Removal Team will need to find a quality suction point that will allow ease of access, is aesthetically pleasing, and provides the best possible outcome for success.
When we find the best suction point, our team will drill a 5" hole into the basement slab for the Mitigation system.
Once the hole drilling is over, our EPA Licensed Radon Mitigation Contractor will determine the necessary depth of the "communication pit" based on substrate material analysis and soil sampling.
This step is vital because the correct dimensions of the contact hole will allow the ventilation fan to draw air from beneath the slab and expel Radon from the house.
If the pit does not have the correct dimensions, it will not have the proper pull to direct Radon out of the home.
Once the communication cavity has been dug, the mitigation specialist will find a discharge point to exhaust the Radon safely out of your Wadsworth home.
It is critical to making sure the radon has been eliminated. It does not have the opportunity to re-enter your Wadsworth home due to a poorly routed Radon Mitigation System.
Now we can begin the pipe fitting process. We start this process by sealing the direct access tube base into the ground. T
his will be done using a backer rod to fill in the gap and finished with an industrial class caulk that does not outgas.
After the base piping is put into place, the Radon Eliminator specialist will choose the best pipe pathway for the remainder of the Mitigation System.
Next, we will connect the PVC pipes with a chemical binding agent to stop any likely leaks in the piping system and join the ventilation exhaust fan along the tube path.
It is essential to ensure that the exhaust fan is installed correctly, so it has enough sucking to draw the active Radon Gas from beneath your Wadsworth basement home.
After the piping system has been put into place and all the other possible intrusion points are sealed, the specialist will ensure the ventilation system is working correctly by putting in a system monitor gauge.
The final step for our team is to test the pulling power of the system. This allows us to make sure that the system is working properly.
This is an accurate measurement of the effectiveness of the suction pulling Radon Gas out of your Wadsworth home.
Once the Radon Mitigation system gets installed, it will run without any further maintenance or upkeep! You can breathe easier knowing your Wadsworth home has been abolished from dangerous Radon Gas Levels.
Let our Radon Abatement Team Safely Mitigate your Wadsworth, OH home or business today!
Radon Eliminator is Wadsworth, Ohio's #1 Radon Mitigation and Radon Testing Company.
Get Your Professional Radon Mitigation Estimate in Wadsworth, Ohio today!
Great company! I like that it is locally owned and operated!