If your home in Uniontown, OH, contains elevated Radon Gas levels, it is vital to hire a licensed professional to install a removal system.
Radon Mitigation Systems reduce this dangerous gas's high concentration levels inside living spaces of homes and buildings.
Installation Performed the Right Way
Some rules and regulations need following when installing a radon removal system, which is why it is crucial to hire a professional who will keep your system up-to-code.
The Team at Radon Eliminator is Licensed with The Ohio Department of Health, and they have the training and skills to install your system properly.
1. To begin the installation process, the first step is for the technician to find a quality suction point that is easy to access and has the best outcome for success.
2. The technician will then drill a 5" hole in the sub-slab of the basement. Your Radon Eliminator mitigation specialist will use the hole for the deployment of the mitigation system.
The specialist needs to get the dimensions correct for the communication pit. If they are wrong, there may not be enough suction for the gas to be removed.
3. Next, the specialist will need to decide the best location for the discharge point to exhaust the gas from the house.
The specialist will need to make sure the location does not give the gas a chance to re-enter the home once discharged.
4. When the discharge point has been located, the technician will begin the pipe fitting process. The pipe base that goes directly into the ground will then need to be sealed.
This sealing is done using a backer rod to fill the spatial gap and finished with industrial-grade caulk.
5. After the piping has been placed; your mitigation specialist will decide the pipe pathway for exiting the home. A chemical welding agent will connect the PVC piping to ensure no leaks in the piping system.
6. Finally, the ventilation fan, along with the pipe pathway, can be installed. The exhaust fan, which is the component that sucks the gas out of the home, can either be installed outside of the home or, in some cases, your technician can install it inside the garage attic.
The technician will set up a radon continuous monitoring device in the home's basement when the installation has been completed. They will leave the testing unit there for a minimum of 72 hours, giving it time to collect data on the home's radon levels.
When the technician comes back to collect the testing device, they will have an accurate reading of the radon levels in your home. If, for some reason, the system has not brought the levels down below the EPA recommended action level of 4.0, the team will come back and do whatever needs to be done at no additional cost to you.
If your Uniontown, OH home has high levels of radon gas, it's important to contact a licensed contractor as soon as possible to remove the dangerous gas from your home.
Radon gas is the second leading cause of lung cancer in the United States.
Keep your family safe by having a removal system installed in your home. Click below for a Free Estimate on a Radon Mitigation System in Uniontown, OH today.
If your Uniontown, OH home has elevated levels of Radon Gas, click below for a free radon removal estimate from our Licensed Mitigation Contractors.
Great team to work with. Professional and knowledgeable.