Radon Mitigation or Radon Abatement is the process used to reduce Radon Gas levels within the breathing zones of occupied Youngstown homes and buildings.
Installation the Right Way
Radon Eliminator can help you fix your Radon Gas problem, but it will require some work. During the initial phases of testing, we look at several key points of Radon gas intrusion.
From there, we develop a plan of action based upon the particular needs of your Youngstown home in order to handle the problem the right way.
To begin the Radon Removal process, we need to find a quality suction point. This will allow ease of access, be aesthetically pleasing, and provide the best possible outcome for success.
After we have located the proper suction point, we can begin by drilling a 5" hole into the basement slab for the deployment of the Mitigation system. Once the hole is dug, our Radon Removal Contractor will decide how large the "communication pit" needs to be.
He will base his decision on a soil sample and substrate material analysis.
This critical step will help determine the correct dimensions of the communication pit, which will create the proper pathway to draw air from beneath the slab that directs Radon out of your Youngstown home.
If the pit is too small, it will not have enough suction to draw out the Radon.
The contractor will begin analyzing a proper discharge point to exhaust the Radon Gas out of your Youngstown home when the pit has been dug.
This is essential to make sure that the radon being removed does not have the opportunity to re-enter the home due to a poorly routed Mitigation System.
Next, we will begin the pipe fitting process after the proper discharge point has been identified and drilled out.
This process will begin with sealing the pipe base that goes directly into the ground, which will be done using a backer rod to fill in the gap and finished with an industrial-grade caulk.
After the initial piping is set, the specialist will choose the right pipe pathway; then, the Radon Eliminator team will connect the PVC pipes with a chemical welding agent to make sure there are no leaks in the piping system.
Once complete, we can begin the installation of the ventilation fan along the pipe pathway.
Installing the exhaust fan in the proper location is important to make sure there is enough suction to pull the radioactive Radon Gas from beneath your basement floor all the way out of your Youngstown home.
After the piping has been placed and all the cracks and intrusion points have been filled, the Radon Mitigation Specialist will install a system that will monitor and gauge the ventilation in your Youngstown home to make sure everything is working properly.
The final step for our Radon Eliminator team is to test the pull of the system. This will let you know that the system is working and pulling Radon gas out of your home!
After the Radon Mitigation system is installed, it will run without any real maintenance or upkeep!
You can sleep easy knowing your Youngstown home is now safe from high levels of Radioactive Radon Gas.
Let the Radon Abatement Specialists Safely Mitigate your Youngstown home today!
Radon Eliminator is Youngstown Ohio's #1 Radon Mitigation and Radon Testing Company
Protect Your Family, Learn How to Remove Radon from Your Youngstown, Ohio Home Today!
Fast, friendly, efficient.
Radon Eliminator
4392 S. Arlington Rd
Uniontown, OH 44685
Call Us: 330-248-5322