Ohio Mitigation License # RC202
Contact Warren, Ohio's Premier Radon Mitigation Company
Radon Mitigation or Radon Remediation is used to reduce Radon Gas concentrations in the breathing zones of occupied buildings in Warren, Ohio.
Installation The Right Way
It is easy to remove your Radon gas problem, but it will require some work.
During the initial testing phase, we look at seven key points of Radon gas intrusion, and from there, we develop a plan of action based upon the particular needs of your home to handle the problem the right way.
The first part of the Radon Removal process is to search for a quality suction point that will allow easy access, be aesthetically pleasing, and provide the best possible outcome for success.
Once we have the proper suction point, our team will begin drilling a 5" hole into the basement slab to deploy the Mitigation system.
After the hole is dug, our contractor will decide how large the "communication pit" needs to be based on a soil sample and substrate material analysis.
This decision is a critical step because the correct dimensions of the communication pit create the proper pathway to draw air from beneath the slab that directs Radon out of the house.
If the pit is too small, it will not have enough suction to draw out the Radon.
After the pit has been dug, the contractor will analyze an appropriate discharge point to exhaust the Radon Gas outside the home.
This part is essential to ensure that the radon is removed does not have the opportunity to re-enter the home due to a poorly routed Mitigation System.
After the proper discharge point has been identified and drilled out, we can begin the pipe fitting process.
The pipe fitting process begins with sealing the pipe base that goes directly into the ground. Sealing will be done using a backer rod to fill in the gap and finished with an industrial-grade caulk that does not outgas.
After the initial piping is set, the contractor will choose the right pipe pathway. Then, the Radon Eliminator team will connect the PVC pipes with a chemical welding agent to ensure no leaks in the piping system.
Then your Radon Eliminator mitigation specialist will install the ventilation fan along the pipe pathway.
Installing the exhaust fan in the proper location is essential to make sure it has enough suction to pull the radioactive Radon Gas from beneath your basement floor all the way out of your home.
After the piping has been placed and all the other cracks and intrusion points have been filled, the contractor will install a system to monitor and gauge the ventilation system to ensure it is working correctly.
The final step for our Radon Mitigation Team is to test the pull of the system. This test ensures that the system is working properly and pulling Radon gas out of your home.
After the Radon Mitigation system is installed, it will run without any real maintenance or upkeep!
It will feel good to know your Warren home is safe from radioactive Radon Gas.
Let the Radon Abatement Professionals Safely Mitigate your home in Warren today!
Protect Your Family, Learn How to Remove Radon from Your Warren, Ohio Home Today!
Very professional and courteous. Made sure I was satisfied and all questions were answered after they completed the job.
