Ohio Mitigation License # RC202
Contact Strongsville Ohio's Premier Radon Mitigation Company Today For A Free Mitigation Quote
Radon Mitigation safely reduces Radon Gas concentrations in occupied buildings' breathing zones for the lowest possible cost and highest probability of success.
Installation the Performed the Right Way
It is easy to remediate or remove a Radon gas problem, but it requires some work. During the initial Radon Testing phase, we look at seven key points of possible Radon gas intrusion to help us better develop a plan of action based upon your home's particular needs to mitigate the problem correctly.
The first part of the Radon Removal process searches for a quality suction point that allows easy access, is aesthetically pleasing, and provides the best possible outcome for success.
Once we have located the proper suction point, our team will begin drilling a 5" hole into your basement slab to deploy the Mitigation system.
After the hole is dug out, our Licensed Mitigation Contractor will decide how large the "communication pit" needs to be based on a soil sample and the underlying substrate material analysis.
This is a critical step because the correct dimensions of the communication pit create the proper vehicle to pull air from beneath your basement slab that guides Radon out of the house.
If the communication pit is too small, it will not have enough suction to draw the Radon gas out of your Strongsville home.
After the pit has been dug, the contractor will begin analyzing a proper discharge point to exhaust the Radon Gas outside the home.
This part is essential to make sure that the radon is removed, does not have the opportunity to re-enter the home due to a poorly routed Mitigation System.
After the proper discharge point has been identified and drilled out, we can begin the pipe fitting process.
The pipe fitting process for Mitigation begins with sealing the pipe base that goes directly into the ground. This will be done using a backer rod to fill in the spatial gap and finished with an industrial-grade caulk.
After the initial piping is set, the Mitigation Contractor will choose the right pipe pathway. Then, the Radon Eliminator labor team will connect the PVC pipes with a chemical welding agent to secure a proper fill and ensure no leaks in the piping system.
Then your Radon Eliminator mitigation specialist will install the ventilation fan along the pipe pathway.
Installing an exhaust fan in the proper location is important. We want to make sure the fan has enough suction to pull the radioactive Radon Gas from beneath your basement floor up through the entirety of the piping system so that it goes all the way out of your home.
After the piping has been placed and all the other cracks and intrusion points have been filled, our contractor will re-install a Radon Testing System to monitor and gauge the ventilation system for the next 48 hours to ensure it is working properly.
The last step for our Strongsville Radon Mitigation team to perform is to test the direct pull of the suction system by drilling a small pilot hole in a different section of your floor.
Using a smoke pencil will ensure that smoke does get drawn downward beneath your basement slab. This will let you know that the suction is adequate for pulling Radon gas out of your home.
After the Radon Mitigation system is installed, it will run without any real maintenance or upkeep!
It feels good knowing you can breathe easier in your Strongsville home that is now safe from high radioactive Radon Gas.
Let the Radon Eliminator Professionals Safely Mitigate your Strongsville home today!
Radon Eliminator is Strongsville Ohio's #1 Radon Mitigation and Radon Testing Company
Protect Your Family, Learn How to Remove Radon from Your Strongsville, Ohio Home Today!
The entire team at Radon Eliminator was professional, efficient, accomplished what was expected, cleaned up the job site area and did a great job start to finish.
