Radon Mitigation or Radon Remediation reduces Radon gas concentration levels in the breathing zones of occupied homes and buildings in North Royalton.
Installation Done the Right Way
Removing Radon Gas from your home is easy but will require some work. We will look at several points of Radon gas intrusion during our initial testing phases.
From there, we will develop a plan based upon your North Royalton home's needs to handle the problem the right way.
The beginning of the Radon Removal process is to find a quality suction point to allow easy access, is aesthetically pleasing, and will provide the best possible outcome for success.
Once we have located the best suction point, the Radon Eliminator Team will begin by drilling a 5" hole into the basement slab to place the Mitigation system.
After the hole is complete, our contractor will decide how large the "communication pit" needs to be based on a soil sample and substrate material analysis.
This step is critical because the correct dimensions of the communication pit will create the proper pathway to draw air from beneath the slab that directs the Radon Gas out of your North Royalton home.
If the pit is too small, it will not have the proper suction to draw out the Radon.
Once the pit has been dug, the contractor will analyze the area to find the proper discharge point to exhaust the Radon from your North Royalton home.
This is essential to make sure that the Radon being removed does not have the opportunity to re-enter your home due to a poorly routed Mitigation System.
Once the discharge point for the Mitigation System has been drilled out, we can begin the pipe fitting process.
This process begins by sealing the pipe base that directly goes into the ground.
The contractors will use a backer rod to fill in the gap and finish with an industrial-grade caulk.
When the piping is set, your Radon Eliminator mitigation specialist will choose the pipe pathway. Then, they will connect the PVC pipes with a chemical welding agent to ensure no leaks in the piping system.
Once complete, your specialist will put in the installation of the ventilation fan along the pipe pathway.
Installing the exhaust fan in the proper location is important to make sure it has enough suction to pull the radioactive Radon from beneath your basement floor all the way out of your North Royalton home.
Once the piping is placed and all the other cracks and intrusion points have been filled, the contractor will install a system that will gauge and monitor the ventilation system to ensure it is working properly.
The last step for our team is to run tests on the system after it is completely installed. These tests will let you know that the suction is adequate for pulling Radon Gas out of your North Royalton home.
After the Radon Mitigation system is installed, it will run without any maintenance or upkeep!
It is good to know that you and your family can breathe easier in your North Royalton home, safe from high radioactive radon gas levels.
Let the Radon Abatement Professionals Safely Mitigate your North Royalton home today!
Radon Eliminator is North Royalton, Ohio's #1 Radon Mitigation and Radon Testing Company
Protect Your Family, Learn How to Remove Radon from Your North Royalton, Ohio Home Today!
Able to get out the same week to install system. Very quick installation, took about 2 hours total. System isn?t bulky and doesn?t look too bad on the side of the house. Sent me the results of the post install test the same day the detector was picked up. They were also $100-200 cheaper than the other company I spoke to.