Radon Mitigation in Middleburg Heights, Ohio

If your Middleburg Heights, OH home contains elevated levels of radon gas, you will need to hire a licensed Radon Removal company to rid the house of this cancer-causing gas.

Radon Mitigation systems are designed to reduce high concentration levels of radon inside of homes and buildings. When installed properly, they will make the air breathable again.

What is the Process for Installing a Mitigation System?

Installation Performed the Right Way

Hiring a licensed Radon Mitigation Company is the first step you need to take when finding out that your home is contaminated.

The installation company will install a system to remove the gas from your home once and for all.

1. To begin, the specialist will find a quality suction point that is easily accessible, aesthetically pleasing, and provides the best possible outcome for the system's success.

2. The technician will then drill a 5" hole in the sub-slab of the basement to deploy the mitigation system.

The technician will decide how large the "communication pit" needs to be when the hole is dug.

This step is important because if the dimensions are off, there may not be enough suction to remove the gas from the house.

3. When the communication pit is completed, the specialist will decide the best location for the discharge point. The discharge point is where the radon will be exhausted from the house.

The discharge point must be correct, so the gas will not have a chance to re-enter the home.

4. Next, the technician can begin the pipe fitting process. This process is begun by sealing the pipe base that goes directly into the ground.

The technician can use a backer rod to fill the spatial gap and finish with an industrial-grade caulk.

5. Once the piping has been set; the technician will need to choose the pipe pathway. They will use a chemical welding agent to connect the PVC piping and ensure no leaks in the piping system.

6. Finally, your radon mitigation technician can install the ventilation fan along the pipe pathway. Your Radon Eliminator mitigation specialist can connect the fan on the outside of the home or, in some cases, in the garage attic.

The ventilation fan removes the radon from beneath the home up through the pipe pathway and out into the atmosphere.

How Will You Know If The Mitigation Was a Success?

Once the system is complete, the technician will leave a radon test in the home for 72 hours to ensure the system is working properly.

If, for some reason, your radon levels have not been reduced below the EPA recommended action level, the radon eliminator team will return and do whatever needs to be done at no additional cost to you.

Contact Our Radon Mitigation Experts in Middleburg Heights, Ohio

If your home in Middleburg Heights, OH, contains elevated levels of radon gas, you will need to hire an experienced radon mitigation contractor to install a removal system.