Radon Mitigation Medina Ohio 

Medina, Ohio, contains exceptionally high levels of Radon Gas. Have a Radon Mitigation system installed to protect you and your family. 

What Is A Radon Mitigation System?

Radon Mitigation or Radon Remediation is the process used to reduce Radon gas concentration levels in the breathing zones of occupied homes and buildings in Medina, Ohio. 

What Is The Radon Eliminator Mitigation Process?

The Radon Eliminator Process; Installation the Right Way

Radon Eliminator can safely Remove Radon Gas from your home efficiently, but it will require some work.

During the initial testing phases, we will look at several different points of Radon gas intrusion and develop a personalized plan based on your Medina home's needs. 

The first step of the Radon Removal process is to search for a quality suction point that will allow ease of access, is aesthetically pleasing, and give the best possible outcome for success. 

Once we have the right suction point, our Radon Eliminator Team will begin drilling a 5" hole into the basement slab to deploy the Mitigation system.

After this, our contractor will decide how large the "communication pit" needs to be based on a soil sample and substrate material analysis.

This decision is a critical step because the correct dimensions of the communication pit create the proper pathway to draw air from beneath the slab that directs Radon out of your Medina home.

If the pit is too small, it will not have enough suction to draw the Radon Gas out of your home. 

After the pit has been dug out, the contractor will analyze a discharge point to exhaust the Radon Gas outside the house.

This part is essential to ensure that the removed radon does not have the opportunity to reinfiltrate your Medina home because of a poorly routed Mitigation System. 

Now that the proper discharge point has been identified and drilled out, we can begin the pipe fitting process.

This process begins by sealing the pipe base that goes directly into the ground. This will be done using a backer rod to fill in the gap and finished with an industrial-grade caulk that does not outgas.

After the initial piping is set, the contractor will choose the right pipe pathway. Then, the Radon Eliminator Mitigation Specialist will connect the PVC pipes with a chemical welding agent to ensure no leaks in the piping system and install the ventilation fan along the pipe pathway.

Installing the exhaust fan in the proper location is key to making sure it has enough suction to pull the radioactive radon gas from beneath your basement floor all the way out of your Medina home.

How Do You Know the installation Process Worked?

After the piping is in place and all other intrusion point cracks are filled, the contractor will install a system monitor gauge to ensure the ventilation system is working properly.

The final step is for us to test the system's pull by making sure that Radon Gas is being drawn down into the basement floor. This lets you know that the suction is adequate for pulling Radon Gas out of your Medina home.

After the Radon Removal system is installed, it runs independently without any real maintenance or upkeep!

You and your family can breathe easier knowing that your Medina home is now safe from high radon radioactive gas. 

Let the Radon Abatement Professionals Safely Mitigate your Medina home today!

 Radon Eliminator is Medina Ohio's #1 Radon Mitigation and Radon Testing Company