Radon Mitigation In Hartville Ohio

Hartville has some of the highest levels of Radon Gas in the state of Ohio. Have your Radon Mitigation system put in the right way.

What Is A Radon Mitigation System? 

Radon Mitigation is the process used to reduce Radon Gas levels within the breathing zones of occupied buildings.

What Mitigation Process Is Used By Radon Eliminator?

Installation the Right Way

It will be easy to fix your Radon Gas problem but will require some work.

First, we will look at several points of Radon Gas intrusion during our initial testing phase. From there, we will develop a plan of action based on your home's particular needs to handle the problem the right way. 

To begin the Radon Removal process, we will need to find a quality suction point that will allow ease of access, be aesthetically pleasing, and provide the best possible outcome for success.

After the proper suction point has been located, we can begin by drilling a 5" hole into the basement slab to deploy the Mitigation system.

Once the hole is dug, one of our Radon Removal Specialists will decide how large the "communication pit" needs to be. He will base this decision on a soil sample and substrate material analysis.

This step is critical to help determine the correct dimensions of the communication pit, which will create the proper pathway to draw air from beneath the slab that directs Radon out of the house. If the pit is too small, it will not have enough suction to draw out the Radon. 

When the pit has been dug, the specialist will begin analyzing a proper discharge point to exhaust the Radon Gas out of the home.

This analysis is essential to ensure that the removed radon does not have the opportunity to re-enter the home due to a poorly routed Mitigation System.

After the proper discharge point has been identified and drilled out, we will begin the pipe fitting process.

The process will begin by sealing the pipe base that goes directly into the ground using a backer rod to fill the gap and finished with an industrial-grade caulk.

After the initial piping is set, the specialist will choose the right pipe pathway. Then, the Radon Eliminator team will connect the PVC pipes with a chemical welding agent to ensure no leaks in the piping system.

When complete, we can begin the installation of the ventilation fan along the pipe pathway.

Installing the exhaust fan in the proper location is important to make sure there is enough suction to pull the radioactive Radon Gas from beneath your basement floor all the way out of your home.

How Will You Know If The Installation Process Worked? 

After all the piping has been placed, and the cracks and intrusion points have been filled, the Radon Mitigation Specialist will install a system that will monitor and gauge the ventilation in your Hartville home to make sure everything is working properly.

The final step for our Radon Eliminator team is to test the system's pull by drilling a small pilot hole in a different section of your floor.

Using a smoke pencil will ensure that smoke does not get drawn down into the basement, letting you know that the suction is adequate for pulling Radon gas out of your home.

After the Radon Mitigation system is installed, it will run without any real maintenance or upkeep! It feels good knowing you can breathe easier in your Hartville home that is now safe from high radioactive Radon Gas. 

Let the Radon Eliminator Specialists Safely Mitigate your Hartville home today!

Radon Eliminator is Hartville Ohio's #1 Radon Mitigation and Radon Testing Company