Radon Mitigation or Radon Reduction is the process used to reduce radon gas concentrations in the breathing zones of occupied buildings and homes in Brecksville.
Installation the Right Way
Radon Eliminator can help you remediate your Radon Gas problem easily but will require some work.
During our initial testing visit, we look at several key points of Radon gas intrusion and develop a plan based on your Brecksville home's needs.
The first part of the Radon Removal process is to find a quality suction point that will allow ease of access, is aesthetically pleasing, and gives the best possible outcome for success to remove the Radon from your Brecksville home.
Once we have located the proper suction point, our team of specialists will drill a 5" hole into the basement slab to deploy the Mitigation system.
Our specialists will decide how large the "communication pit" needs to be when the hole is dug based on a soil sample and substrate material analysis.
This is a critical step because the proper dimensions of the pit create the right pathway to draw air from beneath the slab that will direct the Radon Gas out of your Brecksville home.
If the pit is too small, it will not have enough suction to draw out the Radon.
Once the pit is dug, the Radon Mitigation Specialist will analyze a discharge point to exhaust the Radon Gas from your Brecksville home.
This part is essential to ensure that the Radon being removed does not have the opportunity to re-enter the home because of a poorly routed Mitigation System.
Now that the proper discharge point has been identified and drilled out, we can begin the pipe fitting process.
The pipe fitting process begins with sealing the pipe base that goes directly into the ground. This will be done using a backer rod to fill in the gap and finished with an industrial-grade caulk that does not outgas.
After the initial piping, is set the specialists will choose the right pipe pathway. Then, the Radon Eliminator team will connect the PVC pipes with a chemical welding agent to ensure no leaks in the piping system.
Then they will install the ventilation fan along the pipe pathway.
Installing the exhaust fan in the proper location is key to making sure it has enough suction to pull the radioactive Radon Gas from beneath your basement floor all the way out of your Brecksville home.
After the piping is in place and all other intrusion points and cracks are filled, the specialist will install a system monitor gauge to ensure the ventilation system is working properly.
The final step is for our team to test the system's pull by performing post installment tests to make sure that the suction is adequate for pulling Radon Gas out of your Brecksville home.
After the Radon Removal system is installed, it will run without any real maintenance or upkeep!
You and your family can sleep easier knowing your Brecksville home is now safe from high Radon Radioactive Gas.
Let the Radon Abatement Professionals Safely Mitigate your Brecksville home today!
Radon Eliminator is Brecksville Ohio's #1 Radon Mitigation and Radon Testing Company
Learn How to Remove Radon from Your Brecksville, Ohio Home Today!
Very professional and courteous. Made sure I was satisfied and all questions were answered after they completed the job.
Radon Eliminator
4392 S. Arlington Rd
Uniontown, OH 44685
Call Us: 330-248-5322