Radon Testing Kent OH | Licensed RC202 Pros | 48-Hour Results

Portage County sits inside one of the highest radon-risk zones in the United States. The EPA classifies Portage County — including Kent, Stow, Ravenna, and Brimfield — as Zone 1, meaning the predicted average indoor radon level exceeds 4.0 pCi/L. That is the EPA's action threshold, the point at which mitigation is recommended. For Kent homeowners, this is not a theoretical concern. It is a measurable, fixable problem — and Radon Testing in Kent OH is the first step.

Radon Eliminator is Ohio's licensed radon specialist (Ohio Department of Health Mitigation License RC202). We are not an HVAC company that added radon as a side service. Radon testing and mitigation is the only thing we do — across residential, commercial, school, and apartment properties throughout Northeast Ohio. When a Kent home inspector flags elevated radon mid-transaction, our phone rings. When a Kent State University rental property needs compliance documentation, our team is on site within days.

Whether you searched Radon Testing near me after a scary news segment, or your agent told you the buyer's inspector found 6.8 pCi/L and closing is next Friday, you are in the right place. We deliver clear answers, honest pricing, and EPA-aligned results that hold up in any transaction.

Most radon issues in Kent surface during a real-estate transaction — and most local contractors can't move fast enough to keep a deal alive. Here is what separates us from the general inspector or basement-waterproofing company offering radon as an add-on:

• Ohio License RC202 — published, verifiable, and required by Ohio law for any company performing radon work. Many competitors won't print their license number. We lead with ours.
• 48-hour test turnaround — closing-day timelines drive our scheduling, not contractor convenience. We will not blow up your closing.
• EPA-aligned protocols — we follow ANSI/AARST MAH-2019 testing standards using calibrated continuous radon monitors (CRMs), not cheap charcoal pucks.
• Transparent pricing — published rates for standard residential testing in Kent. No "call for a quote" runaround.
• Multi-vertical depth — single-family homes, commercial buildings, multi-unit apartments, and K–12 schools. We carry the licensing, insurance, and protocols most local outfits cannot.
• Home inspector referral program — Kent inspectors who refer radon work get a named Special Offer for their clients and priority scheduling.

If you are comparing the best Radon Testing Kent options, ask every company for their Ohio license number, their measurement device type, and their guaranteed turnaround. Most will fumble at least two of those three questions.

Not every property needs the same test. A 1920s bungalow off Crain Avenue with a fieldstone foundation requires different placement than a new-build in Sunnybrook or a 60-unit apartment complex near Kent State. Here is what we offer:

The fastest and most common test we run in Kent. A continuous radon monitor (CRM) is placed in the lowest livable area of the home for a minimum of 48 hours under closed-house conditions. Results are delivered as a digital report with hourly readings, average pCi/L, and a clear pass/fail against the EPA's 4.0 pCi/L action level. This report is accepted by lenders, title companies, and FHA/VA appraisers across Ohio.

For homeowners not in a transaction, a long-term test gives a more accurate picture of year-round exposure. Radon levels in Kent fluctuate with barometric pressure, frost depth, and HVAC cycling — winter readings often run 30–50% higher than summer. If you sleep, work, or have children in a basement bedroom, a long-term test is the right call.

Multi-family and commercial properties in Kent fall under different testing protocols (ANSI/AARST MAMF and MALB standards). We test apartment complexes near Kent State, office buildings along East Main Street, and school facilities throughout Portage County. Reports include unit-by-unit results, building-wide averages, and compliance documentation suitable for HUD, state inspectors, and insurance underwriters.

After any mitigation system is installed — by us or another contractor — a follow-up test is required to confirm the system is pulling radon below 4.0 pCi/L. We perform independent post-mitigation testing across Kent for homeowners who want a second opinion on a system installed by someone else.

If you already suspect elevated levels — a neighbor tested high, your home has a sump pit, or your basement is finished living space — we offer bundled pricing on testing plus mitigation system installation. This is the most affordable Radon Testing Kent option for homeowners who know action is likely needed regardless of the result. Ask about our home inspector referral discount.

Every test we run in Kent follows the same rigorous, EPA-aligned protocol. Here is exactly what happens:

1. Schedule (same-day callback). Call or submit a form. We confirm property type, timeline (especially closing date), and pricing in one conversation — no quote runaround.
2. Pre-test instructions. We send you a closed-house conditions checklist 24 hours before placement. Windows closed, HVAC normal, no exterior doors propped open. Compliance with this step is what separates a defensible test from a useless one.
3. Device placement. A licensed Radon Eliminator technician (RC202) places a calibrated continuous radon monitor in the lowest livable level — typically the basement or first floor. Placement follows ANSI/AARST MAH-2019 standards: 20" from exterior walls, 3 feet from windows, away from drafts.
4. 48-hour data logging. The CRM records hourly radon concentration, temperature, humidity, and tamper events. Tamper detection is critical in real-estate transactions — it proves no one opened windows to game the test.
5. Report delivery. Within 24 hours of pickup, you receive a digital PDF report with hourly graphs, average pCi/L, and a clear recommendation. If mitigation is needed, we provide a fixed-price quote with the report — no second visit required.

Kent's geology is the reason we stay busy. The city sits on glacial till over Sharon Conglomerate and shale bedrock — formations rich in uranium-238, which decays into radon gas. That gas migrates up through soil, foundation cracks, sump pits, and slab joints into the homes above.

We test homes throughout Kent and the surrounding area, including:

• Downtown Kent — older brick homes near Franklin Avenue and Park Avenue, often with stone foundations and dirt-floor crawlspaces that pull radon aggressively.
• Sunnybrook and Twin Lakes — newer subdivisions with poured-concrete basements where slab penetrations are the primary radon entry point.
• Kent State University area — student rentals and multi-family properties where landlord testing has become standard due diligence.
• Brady Lake and Brimfield — rural and semi-rural properties with private wells (which can also introduce waterborne radon).
• Nearby cities — we also serve Stow, Ravenna, Tallmadge, Cuyahoga Falls, and Hudson with the same 48-hour turnaround.

Because we work this geography every week, we know which neighborhoods tend to test high. Homes with finished basements east of the Cuyahoga River frequently come back above 6.0 pCi/L. Newer builds with passive radon-resistant construction (post-2010) still sometimes test high because the passive vent stack was never activated. We have seen it all in Kent — and we know how to fix it.

We publish pricing because the "call for a quote" game wastes your time. Standard rates for professional Radon Testing Kent properties:

• Residential 48-hour CRM test: $150–$200 (single-family home, one device)
• Real-estate transaction test with same-week scheduling: $175–$225
• Post-mitigation verification test: $125–$175
• Commercial / multi-unit testing: Quoted per device based on building size and unit count
• Test + mitigation bundle: Test cost credited toward mitigation if levels exceed 4.0 pCi/L

Final pricing depends on square footage, number of devices required, and scheduling urgency. We confirm the full price before placement — no surprises.