Radon Mitigation Tallmadge OH | Licensed RC202 Pros

Photo by AI Generated (Grok Imagine)

If your inspection report came back high and you have two weeks to close, you need a contractor who works on your deadline — not theirs. Radon Eliminator is the licensed Ohio radon mitigation team (Ohio Mitigation License RC202) Tallmadge homeowners, agents, and property managers call when the number has to come down — and the paperwork has to hold up.

Summit County sits inside one of the highest radon-exposure zones in the United States. The EPA classifies most of northeast Ohio as Zone 1, meaning the average indoor radon screening level exceeds 4.0 pCi/L. In Tallmadge specifically — with its clay-heavy glacial till soils and the prevalence of finished basements in neighborhoods like Tallmadge Circle, North Munroe, Overdale, and the newer builds off South Avenue — elevated radon is not a rare anomaly. It's the baseline assumption.

Our job is to install a permanent, code-compliant sub-slab depressurization system, retest under EPA protocols, and hand you documentation that satisfies buyers, lenders, county health departments, and (when applicable) Ohio Department of Health requirements for schools and multifamily buildings.

Call (330) 871-2300 for same-week service in Tallmadge.

Tallmadge homeowners have options — but most local radon contractors are general-purpose remodelers who added a fan to their truck. We are not. Radon is the only thing we do, and we do it under a specific Ohio license that the state requires for legal mitigation work.

• Ohio Mitigation License RC202 — published on every quote, every invoice, every permit. Most competitors omit their license number entirely. Ask for it before you hire anyone.
• Closing-Date Radon Service — a productized track for real-estate transactions. We schedule the install, the post-mitigation test, and the documentation packet against your contract date, not our backlog.
• Guaranteed result under 4.0 pCi/L — the EPA action level. If post-mitigation testing doesn't come in below the threshold, we modify the system at no charge until it does.
• Multi-vertical experience — we work on single-family homes, apartment complexes, commercial buildings, and Ohio schools. Larger property owners with legal exposure get a contractor who understands their compliance obligations.
• Home Inspector Partner Program — Tallmadge-area inspectors who refer radon work get a published preferred-pricing structure and priority scheduling for their clients.
• Transparent pricing — flat-rate quotes given on-site, not vague ranges over the phone. You'll know the number before we start drilling.

Photo by AI Generated (Grok Imagine)

Our Tallmadge service line covers the full radon lifecycle — from the initial short-term test through permanent mitigation and ongoing system verification.

Active sub-slab depressurization (ASD) is the EPA-recommended standard for slab-on-grade and basement homes — the dominant construction styles in Tallmadge. We core through the slab, seal vapor pathways, route PVC discharge piping through the conditioned envelope or an exterior chase, install a properly sized radon fan (RP145, RP265, or HP series depending on soil permeability), and terminate above the roofline per ANSI/AARST SGM-SF-2017 standards. Most Tallmadge installs are completed in a single day.

Multifamily and commercial buildings in Tallmadge — including converted properties near Tallmadge Circle and apartment communities along East Avenue — require ANSI/AARST CCAH and RMS-LB protocols, not residential standards. We design block-by-block depressurization for multi-unit foundations, coordinate with property managers on tenant access, and produce the documentation packages Ohio commercial property owners need for liability and disclosure compliance.

Short-term continuous radon monitor (CRM) tests deliver hour-by-hour data within 48 hours — fast enough for real-estate timelines. We use calibrated, NRPP-approved devices and follow EPA closed-house conditions. Every test produces a tamper-proof report suitable for buyers, lenders, and the Summit County Health District.

Bought a Tallmadge home with an existing radon system? We inspect the fan, manometer, piping integrity, and labeling, then run a fresh post-mitigation test. Older Tallmadge installs from the 1990s and early 2000s often use undersized fans or improper exterior terminations that no longer meet code. We upgrade what needs upgrading and leave the rest.

When a deal is on the clock, we dispatch a licensed assessor to Tallmadge same-day or next-day. Diagnostic communication testing identifies the right fan size and piping route before we commit to a price, so the quote you get is the price you pay.

Every Tallmadge project follows the same five-step protocol — built around EPA guidance and ANSI/AARST consensus standards.

1. Pre-mitigation test or report review. If you already have a result from your home inspector, we review it. If not, we deploy a CRM and have results in 48 hours.
2. On-site diagnostic and design. We perform pressure-field extension testing through a core hole to confirm soil communication. This determines fan sizing, suction-point count, and routing.
3. System installation. Most single-family Tallmadge homes are completed in 4–8 hours. We seal slab penetrations, sump covers, and accessible cracks; install the fan in attic, garage, or exterior location per code; and label every component.
4. Post-mitigation verification test. A minimum 48-hour CRM test confirms the result is below 4.0 pCi/L. We don't close the job until the number is verified.
5. Documentation packet. You receive the system diagram, fan specifications, warranty, post-test report, and Ohio license documentation — everything a buyer, lender, or appraiser will ask for.

Tallmadge sits on the western edge of the glaciated Allegheny Plateau, where uranium-bearing shales and the residual soils above them generate steady radon flux into building foundations. The city's housing stock skews toward 1950s–1980s ranches and split-levels with full basements — the exact construction profile most vulnerable to sub-slab radon accumulation.

We've installed systems across Tallmadge — from the historic homes ringing the Tallmadge Circle Historic District, to the post-war neighborhoods off North Munroe Road, to newer construction near Lakemore and the Tallmadge–Brimfield border. We also serve adjacent communities including Akron, Cuyahoga Falls, Stow, Munroe Falls, Kent, Hudson, and Mogadore.

The Ohio Department of Health publishes county-by-county radon data, and Summit County consistently reports that more than 40% of homes tested exceed the EPA action level of 4.0 pCi/L. If you live in Tallmadge and you haven't tested in the last two years, the statistical likelihood you're above action level is meaningful — not theoretical.

Most single-family Tallmadge homes fall in the $1,200–$1,800 range for a complete active sub-slab depressurization system, including post-mitigation verification testing and all documentation. Variables that move the number:

• Number of suction points required (multi-zone slabs, additions, crawl space combinations)
• Fan sizing — tighter soils require higher-vacuum fans (HP series)
• Routing complexity — interior chase vs. exterior run
• Crawl space encapsulation, if present

Commercial, school, and apartment pricing is quoted per building after diagnostic testing. We do not give vague phone ranges for residential work — we provide a flat, written quote on-site so you know exactly what you're signing.