Radon Mitigation Brady OH | Licensed RC202 Pros

Photo by AI Generated (Grok Imagine)

If your home inspection in Brady just flagged a radon reading above 4.0 pCi/L, you need two things: a straight answer and a permanent fix. Radon Eliminator is a licensed Ohio radon mitigation contractor (Ohio License RC202) installing EPA-aligned mitigation systems across Brady and the surrounding Williams County region. We don't sell fans. We sell a documented system, a clean install, and a post-mitigation test result under the EPA action level.

Radon is a colorless, odorless radioactive gas produced by the natural breakdown of uranium in Ohio soil. The Ohio Department of Health classifies large portions of the state — including northwest Ohio communities like Brady — as Zone 1, the highest predicted radon level. According to EPA data, roughly 1 in 4 Ohio homes tests above 4.0 pCi/L. That's not a statistic to scare you. It's the reason we exist.

Whether you're racing a closing deadline, you're an agent who needs a defensible report, or you're a property owner with legal exposure on an apartment building or school, our Brady radon mitigation services are scoped to your timeline — not ours.

Most Brady-area radon contractors bury their license number, dodge price questions, and treat closing-date jobs as an inconvenience. We do the opposite.

• Ohio Radon Mitigation License RC202 — stated on every quote, every contract, every permit. Verifiable through the Ohio Department of Health.
• Closing-Date Radon Service — testing and mitigation calendared backward from your closing date, with written confirmation to the title company and listing agent.
• EPA-aligned protocols — continuous radon monitors, 48-hour closed-house conditions, and post-mitigation verification testing on every job.
• Multi-vertical experience — residential homes, commercial buildings, apartment complexes, and Ohio K-12 schools. Most local shops only handle single-family.
• Transparent pricing — typical Brady residential mitigation systems run $1,150 to $1,950 depending on foundation type, with the quote provided in writing before we touch a tool.
• Lifetime workmanship warranty on the system, plus a written guarantee that post-mitigation levels will fall below 4.0 pCi/L.

That's the short version. The longer version is that we answer the phone, we show up when we said we would, and we don't leave PVC running up the side of your house looking like a science fair project.

Photo by AI Generated (Grok Imagine)

Radon Eliminator delivers a complete radon testing and mitigation program for Brady property owners. Every service is performed by Ohio-licensed technicians under RC202.

Sub-slab depressurization (SSD) is the gold-standard mitigation method for most Brady homes, particularly the slab-on-grade ranches and full-basement properties common across northwest Ohio. We core the slab, install a sealed suction pit, run schedule-40 PVC to a roofline discharge, and mount a UL-listed radon fan with a manometer for ongoing monitoring. Typical install: one day, start to finish.

Our Closing-Date Radon Service is built around the contract calendar. We deploy continuous radon monitors with 48-hour turnaround, install mitigation within 3–5 business days when needed, and deliver a signed post-mitigation report acceptable to lenders, title companies, and FHA/VA underwriters. We coordinate directly with your Brady-area Realtor.

Ohio law and HUD requirements impose specific radon obligations on apartment owners, school districts, and commercial landlords. We design and install multi-point mitigation systems for buildings up to 100,000+ sq ft, including phased testing under ANSI/AARST MAMF and MS-PMD protocols. Reports are formatted for school board review and insurance documentation.

If your Brady home already has a mitigation system but tests are still high, the fan is loud, or the manometer reads zero, we'll diagnose it. Common failures: undersized fans, leaking sump covers, unsealed slab penetrations, and improper discharge locations. Most upgrades complete in a half-day.

Every installation includes a follow-up radon test 24 hours to 30 days after activation, per EPA protocol. You receive a written report with the measured pCi/L value. If the system doesn't bring levels below 4.0 pCi/L, we modify it at no additional cost — that's our written guarantee.

Five steps. No surprises. No upsells once the truck is in the driveway.

1. Phone consultation (same day). We review your existing test results, foundation type, and timeline. If you're under a real-estate deadline, we schedule around your closing date.
2. On-site diagnostic visit. A licensed RC202 technician inspects the foundation, identifies sub-slab communication paths, locates the optimal suction point, and confirms the discharge route. Written quote provided before we leave.
3. System installation. Typically completed in 4–8 hours. Includes slab coring, suction pit, sealed PVC piping, UL-listed fan, U-tube manometer, electrical tie-in by a licensed electrician, and exterior caulking and finish work.
4. Post-mitigation testing. Continuous radon monitor deployed for 48 hours under EPA closed-house conditions. Results documented and emailed to you, your agent, and your title company if applicable.
5. Documentation & warranty. You receive a system manual, manometer reading instructions, lifetime workmanship warranty, and our written sub-4.0 pCi/L guarantee.

Brady sits in Williams County in Ohio's northwest corner — a region with glacial till soils, fractured limestone bedrock, and groundwater pathways that create textbook conditions for radon entry. Homes near the Tiffin River corridor, properties along County Road 6 and State Route 49, and older farmhouses with stone foundations or partial basements consistently test high.

We've installed mitigation systems throughout Williams and Defiance counties, including West Unity, Bryan, Montpelier, Edon, and across the Brady township area. We know the soil. We know which Brady neighborhoods sit on the Bryan Outwash and which ones sit on Wabash moraine. That matters because sub-slab permeability dictates fan sizing, and getting that wrong is why competitors' systems fail post-test.

We also work hand-in-glove with the Brady-area home inspector community. If you're an inspector reading this, ask about our partner program — we publish our referral rates, we don't poach your clients, and we get your buyers under 4.0 pCi/L before the contingency expires.