Radon Mitigation Bergholz OH | RC202 Licensed | Radon Eliminator

Photo by AI Generated (Grok Imagine)

Bergholz sits in Jefferson County, in a part of eastern Ohio where the underlying shale and sandstone geology produces some of the highest radon readings in the state. The EPA classifies Jefferson County as Zone 1 — the highest risk category — meaning the average indoor radon level here exceeds 4.0 pCi/L. That is not a marketing line. That is a federal mapping designation, and it is why Radon Mitigation in Bergholz OH is not optional for most homes with basements or slab foundations.

Radon Eliminator is a licensed Ohio radon contractor — Ohio Mitigation License RC202 — and we lead with that number because Ohio law requires it and most of our competitors bury it. If a contractor cannot show you a current Ohio radon license, they cannot legally install a mitigation system in your home. Period.

We serve Bergholz residents, agents handling Jefferson County closings, and commercial owners across the Ohio Valley with one promise: a permanent, code-compliant system that drives your number below the EPA action level of 4.0 pCi/L, verified with a post-mitigation test and documented in writing.

Call (888) 528-9890 for same-week scheduling in Bergholz.

Every Bergholz property is different. A 1920s farmhouse off County Road 54 has different entry points than a newer slab-on-grade build near OH-164. Our system designs are matched to the structure — not pulled off a one-size truck.

• Active Sub-Slab Depressurization (ASD): The EPA gold standard. We core through the slab, install a sealed suction pit, and vent radon-laden soil gas above the roofline with a calibrated radon fan. This is the system most Bergholz homes need.
• Sub-Membrane Depressurization: For crawl spaces common in older Bergholz homes — sealed reinforced membrane, perimeter sealing, and an exterior-vented fan.
• Drain-Tile Depressurization: When interior or exterior drain tile is present, we tie into it for system-wide pressure differential.
• Block-Wall Depressurization: For homes with hollow concrete block foundations where radon enters through wall voids, not just the slab.
• Commercial & Multi-Family Mitigation: Apartment buildings, schools, daycares, and commercial facilities require zoned systems and ANSI/AARST-CCAH or RMS-LB compliant design. This is a vertical most local radon shops do not cover.
• Post-Mitigation Verification Testing: A 48-hour continuous radon monitor test after installation, with a signed report you can give a buyer, lender, or county.

Every install includes a system labeling placard, a U-tube manometer, a 5-year fan warranty, and a written guarantee that your post-mitigation reading will be below 4.0 pCi/L.

Photo by AI Generated (Grok Imagine)

If you are reading this because a Bergholz home inspection report came back at 5.8, 7.2, or 12.0 pCi/L and the closing is two weeks out — this is what we do every day. Most contractors schedule around their convenience. We schedule around your closing date.

How the Closing-Date Service Works

• Day 1: Phone consultation, flat-rate quote, scheduling lock-in.
• Day 2–4: On-site system design and full installation (typically one day).
• Day 5–7: 48-hour post-mitigation EPA-aligned test.
• Day 8: Signed report delivered to you, your agent, and the buyer or lender.

Buyers, sellers, and listing agents in Bergholz, Toronto, Steubenville, and across Jefferson County use this service because the result is defensible at the closing table. A documented number below 4.0 pCi/L from an Ohio-licensed RC202 contractor closes deals.

1. EPA-Aligned Diagnostic Testing

We start with a 48-hour continuous radon monitor (CRM), not a charcoal canister. CRMs log hourly readings and are the standard accepted in Ohio real-estate transactions. We also run a smoke-pencil and pressure-field extension diagnostic to map where soil gas is entering.

2. Custom System Design

Based on foundation type, soil permeability, and HVAC layout, we design a system specific to your Bergholz home. We pick the suction point that creates the broadest pressure field with the fewest penetrations and the cleanest exterior vent run.

3. Code-Compliant Installation

Single-day installs are the norm. PVC piping is sized for airflow (typically 3" or 4"), all slab penetrations sealed with polyurethane, and the radon fan is mounted outside conditioned space per ANSI/AARST RMS-LB. Discharge terminates 12 inches above the eave and 10 feet from any opening.

4. Post-Mitigation Verification

48-hour CRM test in the lowest livable level. We do not call the job done until the number is below 4.0 pCi/L. If it is not, we adjust the system at no additional charge.

5. Documentation & Warranty

You receive a signed installation report, the post-test results, system schematic, manometer reading log, and a written workmanship warranty. This package is what closing attorneys and lenders want to see.

Bergholz is a small village on Yellow Creek with housing stock that ranges from late-1800s coal-era homes to modern builds along Township Road 184. The geology beneath the village — Pittsburgh-coal-bearing Pennsylvanian shale and historic mine workings — is a textbook radon source. Homes near the old Y&O mine alignment and along the Yellow Creek valley consistently test elevated.

We have installed mitigation systems throughout Jefferson County: Bergholz, Amsterdam, Hammondsville, Irondale, Empire, Stratton, Toronto, Mingo Junction, and Steubenville. We know which neighborhoods sit on fractured shale, which slab-on-grade developments need extended suction fields, and which older block-foundation homes need wall depressurization in addition to sub-slab work.

If you are in the Bergholz school district, the Edison Local district, or anywhere in the 43908 ZIP, we are typically on-site within 3 business days for testing and within 7–10 days for mitigation.

Communities We Serve Near Bergholz

• Amsterdam, OH (43903)
• Hammondsville, OH (43930)
• Toronto, OH (43964)
• Steubenville, OH (43952)
• Wintersville, OH (43953)
• Richmond, OH (43944)
• Mingo Junction, OH (43938)

We publish flat-rate pricing because the #1 complaint we hear is, "I called three companies and none of them would give me a straight number." Here is ours.

• Standard residential sub-slab system (typical Bergholz home): $1,295 – $1,795 installed
• Complex multi-suction or block-wall systems: $1,795 – $2,650
• Crawl space sub-membrane systems: $1,895 – $3,200 depending on square footage
• Pre-listing radon test (CRM, 48-hour): $185
• Post-mitigation verification test: Included with installation
• Commercial & multi-family: Quoted per building after site walk

Financing is available through our partner lender — 0% for 12 months on approved credit. We also honor our home-inspector partner program: inspectors who refer Bergholz clients get a published rebate, and their clients get $75 off the install.

• Ohio Radon Mitigation License RC202 — current, verifiable through the Ohio Department of Health.
• EPA-aligned protocols on every test (48-hour minimum, closed-house conditions, CRM devices).
• ANSI/AARST RMS-LB & CCAH compliant installations for residential and commercial.
• 5-year fan manufacturer warranty plus our own workmanship warranty.
• Written guarantee: post-mitigation reading below 4.0 pCi/L or we adjust the system at no charge.
• Multi-vertical experience: single-family, apartment complexes, schools, daycares, commercial.